The glasses in the system (100 - x)TeO2–xCaCu3Ti4O12, (x = 0.25 mol.% to 3 mol.%) were fabricated. The color varied from olive green to brown as the CaCu3Ti4O12 (CCTO) content increased in TeO2 matrix. The X-ray powd...
详细信息
The glasses in the system (100 - x)TeO2–xCaCu3Ti4O12, (x = 0.25 mol.% to 3 mol.%) were fabricated. The color varied from olive green to brown as the CaCu3Ti4O12 (CCTO) content increased in TeO2 matrix. The X-ray powder diffraction and differential scanning calorimetric analyses that were carried out on the as-quenched samples confirmed their amorphous and glassy nature respectively. The dielectric constant and loss in the 100 Hz–1 MHz frequency range were monitored as a function of temperature (50–400°C). The dielectric constant and the loss (D) increased as the CCTO content increased in TeO2 at all the frequencies and temperatures under investigation. Further, the and D were found to be frequency-independent in the 50–200°C temperature range. The value obtained for the loss at 1 MHz was 0.0019 which was typical of low loss materials, and exhibited near constant loss (NCL) in the 100 Hz–1 MHz frequency range. The electrical relaxation was rationalized using the electric modulus formalism. These glasses may be of considerable interest as substrates for high frequency circuit elements in conventional semiconductor industries owing to their high thermal stability.
Dielectric studies were carried out on a lead free Sodium Bismuth Titanate, NBT, (Na0.5Bi0.5TiO3) composition. The material was synthesized by conventional ceramic method (CS) and microwave sintering (MS). The presenc...
详细信息
Dielectric studies were carried out on a lead free Sodium Bismuth Titanate, NBT, (Na0.5Bi0.5TiO3) composition. The material was synthesized by conventional ceramic method (CS) and microwave sintering (MS). The presence of single phase has been confirmed by X-ray diffraction and scanning electron microscopy of NBT ceramic. The later technique (MS) resulted in material with high density, dielectric properties and improved microstructure. The transition temperature was observed slightly higher for microwave sintered (MS) material. Longitudinal modulus measurements are very sensitive property to identify the phase transitions in ceramics. Longitudinal modulus (L) measurements were also employed on these samples in the frequency 136 kHz and can be studied in the wide temperature range 30°C to 400°C. The elastic behavior (L) showed a break at two temperatures (~200°C and 350°C) in both the conventional and microwave sintered ceramics. In NBT ceramics, permittivity anomalies are connected to modulus anomalies. T...
暂无评论